Sign In | Join Free | My himfr.com
Home > Power Management ICs >

L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics

Sanhuang electronics (Hong Kong) Co., Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics from wholesalers
     
    Buy cheap L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics from wholesalers
    • Buy cheap L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics from wholesalers

    L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics

    Ask Lasest Price
    Brand Name : STMicroelectronics
    Model Number : L298N
    Price : Based on current price
    Payment Terms : T/T
    Supply Ability : In stock
    Delivery Time : 3-5 work days
    • Product Details
    • Company Profile

    L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics

    L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics

    Product Details

    Description

    The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current twin full-bridge driver that accepts conventional TTL logic levels and drives inductive loads such as relays, solenoids, DC, and stepping motors. There are two enable inputs to enable or disable the device independently of the input signals.


    Features

    OPERATING SUPPLY VOLTAGE UP TO 46 V
    TOTAL DC CURRENT UP TO 4 A
    LOW SATURATION VOLTAGE
    OVERTEMPERATURE PROTECTION
    LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V
    (HIGH NOISE IMMUNITY)


    Applications

    • POWER OUTPUT STAGE
      The L298 has two power output stages (A ; B). The power output stage has a bridge arrangement, and depending on the state of the inputs, its outputs can drive an inductive load in common or differential mode. The current that travels through the load exits the bridge at the sense output; an external resistor (RSA ; RSB.) allows the strength of this current to be detected.

    • INPUT STAGE
      Each bridge is powered by four gates, the inputs of which are In1; In2; EnA and In3; In4; EnB. When the En input is high, the In inputs set the bridge state; when the En input is low, the bridge is inhibited. The inputs are all TTL compatible.

    • SUGGESTIONS
      A non-inductive capacitor, typically of 100 nF, must be planned for between both Vs and Vss, to ground, as close to the GND pin as practicable. When the power supply's huge capacitor is too far away from the IC, a second, smaller capacitor near the L298 must be planned for. The sense resistor, which must not be wire wrapped, must be grounded at the negative pole of Vs, which must be close to the GND pin of the I.C.

    Specifications

    AttributeAttribute Value
    ManufacturerSTMicroelectronics
    Product CategoryFull, Half-Bridge Drivers
    SeriesL298
    ProductStepper Motor Controllers / Drivers
    TypeH-Bridge
    PackagingTube
    Mounting-StyleThrough Hole
    Operating-Temperature-Range- 25 C to + 130 C
    Package-CaseMultiwatt-15 (Vertical, Bent and Staggered Leads)
    TechnologyBipolar
    Operating-Temperature-40°C ~ 150°C (TJ)
    Mounting-TypeThrough Hole
    Features-
    ApplicationsDC Motors, Relays, Solenoids, Stepper Motors
    InterfaceLogic
    Voltage-Supply4.5 V ~ 7 V
    Supplier-Device-Package15-Multiwatt
    Number-of-Outputs4 Outputs
    Rated Output Current-
    Fault-ProtectionCurrent Limiting, Over Temperature
    Output-ConfigurationHalf Bridge (4)
    Load-TypeInductive
    Rds-On-Typ-
    Current-Peak-Output2A
    Voltage-Load4.8 V ~ 46 V
    Operating-Supply-Voltage4.8 V to 46 V
    Operating-Supply-Current13 mA
    Output-Current2 A
    Package-CaseMultiwatt-15V

    Descriptions

    Dual Full Bridge Motor Driver 15-Pin(15+Tab) MULTIWATT V Tube
    Motor / Motion / Ignition Controllers & Drivers Dual Full Bridge
    Quality L298N IC HALF BRIDGE DRVR 15MULTIWATT STMicroelectronics for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sanhuang electronics (Hong Kong) Co., Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)